PMP
PMP is a a few layer composite insulation paper created of higher quality presspaper laminated on the two sides of polyester movie.
Edge:
PMP has superb dielectric toughness, large initial tear strength and tear power
Performance:
one. Excellent dielectric strength
2. Higher initial tear energy and tear power
three. Heat resistance is Class F
Application:
PMP is widely applicable for slot insulation, phase to section insulation and liner insulation in electrical motors and electrical equipment.
Specification:
|
Parameters |
|||||||||||||
| Item | Unit | Benefit | |||||||||||
| Normal Thickness | mm | .15 | .17 | .20 | .22 | .25 | .27 | .thirty | .35 | .forty five | .sixty | ||
| Thickness Tolerance | mm | ±0.02 | ±0.03 | ±0.035 | ±0.045 | ±0.06 | |||||||
| Normal Grammage | g/square meter | 190±28 | 215±32 | 250±38 | 275±40 | 310±46 | 330±50 | 370±50 | 490±73 | 550±80 | 730±110 | ||
| Tensile Strength | Lengthwise | Not Bended | N/10mm | ≥100 | ≥110 | ≥125 | ≥130 | ≥150 | ≥175 | ≥200 | ≥240 | ≥360 | ≥400 |
| Bended | >70 | >75 | >80 | >85 | ≥95 | ≥100 | ≥110 | ≥180 | ≥275 | ≥320 | |||
| Crosswise | Not Bended | >80 | >85 | >90 | >90 | ≥95 | ≥100 | ≥105 | ≥120 | ≥180 | ≥200 | ||
| Bended | >50 | >50 | >50 | ≥55 | ≥60 | ≥70 | ≥80 | ≥115 | ≥175 | ≥190 | |||
| Elongation | Lengthwise | Not Bended | % | ≥2 | ≥3 | ||||||||
| Crosswise | Not Bended | ≥8 | ≥10 | ||||||||||
| Breakdown Voltage | Not Bended | KV | ≥8 | ≥8 | ≥8 | ≥8 | ≥8 | ≥8 | ≥8 | ≥8 | ≥8 | ≥7 | |
| Bended | ≥6 | ≥6 | ≥6 | ≥6 | ≥6 | ≥6 | ≥6 | ≥6 | ≥6 | ≥6 | |||
| Adhesive House | Place Temperature | No delamination | |||||||||||
| 130±2°C 10min | No delamination,blister,or adhersive movement | ||||||||||||
| Temperature Index | °C | ≥155 |
|||||||||||
