We – EPG Group the most significant gearbox & motors , torque limiter couplings and gears manufacturing facility in China with 5 different branches. For far more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 The Generate HUB slides over the SHAFT. The travel hub contains a keyway which corresponds to the keyseat in the SHAFT. When a Essential is in spot, the two members are linked. The clutch is locked on to the SHAFT with Set SCREWS.
100ton Truck Crane QY100K-I 70.4m lifting height
Characteristic
• The progressive jib system adopts embedded block, plug-in increase head and global sophisticated U area jib, which has exceptional lifting efficiency and protected and trustworthy lifting operate.
• The distinctive stretch and retract method avoids the bend of the core pipe and cylinder and the crack of the boom caused by misoperation, strengthening the safety of the functions.
• 8 patent techniques ensure the sleek, substantial efficiency and strength conservation of the lifting, rotation, and luffing techniques.
• The torque limiter adopts vibrant Lcd display, realizing the intelligence of the failure analysis. The precision is in advance of the market.
• Undertake the new hydraulic motor with large torque commencing point, ma ept the secondary lifting safer.
• The humanity design and style helps make the cab and control taxi far more roomy, and simple to operate.
• 6 distinctive production technologies make certain the higher good quality.
Parameters:
| Dimension | Device | QY100K-I |
|---|---|---|
| All round duration, width, top | mm | 15600×3000×3850 |
| Wheel base | mm | 1420+2420+1800+1420+1505 |
| Bodyweight | ||
| Whole excess weight in vacation | kg | 54900 58000 |
| Axle load | ||
| Axle one | kg | 7500 7500 |
| Axle two | kg | 7500 7500 |
| Axle three | kg | 8300 10000 |
| Axle 4 | kg | 12000 12500 |
| Axle 5 | kg | 12000 12500 |
| Axle 6 | kg | 7600 8000 |
| Power | ||
| Engine rated electrical power | kW/(r/min) | 360/1800 (306/1900) |
| Motor rated torque | N.m/(r/min) | 2200/1300 (2571/1200) |
| Motor rated velocity | r/min | 1800 (1900) |
| Min. ground clearance | mm | 310 |
| Journey | ||
| Method angle | ° | 20 |
| Departure angle | ° | 14 |
| Bra ept length (at 30km/h) | m | ≤10 |
| Max. quality capability | % | 40 |
| Min. turning diameter | m | 24 |
| Gas use for 100km | L | 70 |
| Primary functionality | ||
| Max. rated total lifting potential | m | one hundred |
| Min. rated wor ept radius | three | |
| Turning radius at turntable tail | ||
| Counterweight | mm | 4200 |
| Aux. winch | mm | 4590 |
| Max. lifting torque | 3450 | |
| Foundation boom | kN.m | 3450(4m×88t) |
| Fully extended increase | kN.m | 1950(24m×7.1t) |
| Fully extended boom+ jib | kN.m | 1230(19.2m×6t) |
| Outrigger span (entire extension) | ||
| Longitudinal | m | seven.fifty six |
| Lateral | m | 7.six |
| Lifting peak |
|
|
| Foundation boom | m | thirteen.five |
| Totally extended boom | m | fifty.nine |
| Entirely prolonged increase+ jib | m | 70.four |
| Boom size | m | thirteen.five |
| Entirely prolonged boom | m | 51 |
| Entirely extended growth+ jib | m | 51+eighteen.1+four |
| Wor ept velocity | ||
| Jib location angle | ° | ,15,thirty |
| Increase luffing time | s | 75 |
| Growth | ||
| Increase telescoping time | ||
| Entire extension | s | one hundred sixty |
| Max. swing velocity | r/min | two |
| Outrigger extension/retraction time | ||
| Outrigger beam in extension/retraction | s | twenty five/15 |
| Outrigger jack in extension/retraction | s | 45/twenty five |
| Lifting velocity (single rope, layer 4) | ||
| Principal winch | m/min | one zero five |
| Aux. winch | m/min | 104 |
The use of original tools manufacturer’s (OEM) component figures or emblems , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed substitution parts contained herein are not sponsored, approved, or made by the OEM.
